Configuration Reference

NOTE: This page was generated from the OpenVox source code on 2026-08-05 21:48:42 +0200

Configuration settings

See the configuration guide for more details.

agent_catalog_run_lockfile

A lock file to indicate that a puppet agent catalog run is currently in progress. The file contains the pid of the process that holds the lock on the catalog run.

agent_disabled_lockfile

A lock file to indicate that puppet agent runs have been administratively disabled. File contains a JSON object with state information.

allow_duplicate_certs

Whether to allow a new certificate request to overwrite an existing certificate request. If true, then the old certificate must be cleaned using puppetserver ca clean, and the new request signed using puppetserver ca sign.

allow_pson_serialization

Whether to allow PSON serialization. When unable to serialize to JSON or other formats, OpenVox falls back to PSON. This option affects the configuration management service responses of OpenVox Server and the process by which the agent saves its cached catalog. With a default value of false, this option is useful in preventing the loss of data because rich data cannot be serialized via PSON.

always_retry_plugins

Affects how we cache attempts to load OpenVox resource types and features. If true, then calls to Puppet.type.<type>? Puppet.feature.<feature>? will always attempt to load the type or feature (which can be an expensive operation) unless it has already been loaded successfully. This makes it possible for a single agent run to, e.g., install a package that provides the underlying capabilities for a type or feature, and then later load that type or feature during the same run (even if the type or feature had been tested earlier and had not been available).

If this setting is set to false, then types and features will only be checked once, and if they are not available, the negative result is cached and returned for all subsequent attempts to load the type or feature. This behavior is almost always appropriate for the server, and can result in a significant performance improvement for types and features that are checked frequently.

autoflush

Whether log files should always flush to disk.

autosign

Whether (and how) to autosign certificate requests. This setting is only relevant on an OpenVox Server acting as a certificate authority (CA).

Valid values are true (autosigns all certificate requests; not recommended), false (disables autosigning certificates), or the absolute path to a file.

The file specified in this setting may be either a configuration file or a custom policy executable. OpenVox will automatically determine what it is: If the OpenVox user (see the user setting) can execute the file, it will be treated as a policy executable; otherwise, it will be treated as a config file.

If a custom policy executable is configured, the CA OpenVox Server will run it every time it receives a CSR. The executable will be passed the subject CN of the request as a command line argument, and the contents of the CSR in PEM format on stdin. It should exit with a status of 0 if the cert should be autosigned and non-zero if the cert should not be autosigned.

If a certificate request is not autosigned, it will persist for review. An admin user can use the puppetserver ca sign command to manually sign it, or can delete the request.

For info on autosign configuration files, see the guide to OpenVox’s config files.

basemodulepath

The search path for global modules. Should be specified as a list of directories separated by the system path separator character. (The POSIX path separator is ‘:’, and the Windows path separator is ‘;’.)

These are the modules that will be used by all environments. Note that the modules directory of the active environment will have priority over any global directories. For more info, see https://docs.openvoxproject.org/openvox/latest/environments_about.html

binder_config

The binder configuration file. OpenVox reads this file on each request to configure the bindings system. If set to nil (the default), a $confdir/binder_config.yaml is optionally loaded. If it does not exists, a default configuration is used. If the setting :binding_config is specified, it must reference a valid and existing yaml file.

bucketdir

Where FileBucket files are stored.

ca_fingerprint

The expected fingerprint of the CA certificate. If specified, the agent will compare the CA certificate fingerprint that it downloads against this value and reject the CA certificate if the values do not match. This only applies during the first download of the CA certificate.

ca_name

The name to use the Certificate Authority certificate.

ca_port

The port to use for the certificate authority.

ca_refresh_interval

How often the OpenVox agent refreshes its local CA certificates. By default, CA certificates are refreshed every 24 hours. If a different interval is specified, the agent refreshes its CA certificates during the next agent run if the elapsed time since the certificates were last refreshed exceeds the specified duration.

In general, the interval should be greater than the runinterval value. Setting the ca_refresh_interval value to 0 or an equal or lesser value than runinterval causes the CA certificates to be refreshed on every run.

If the agent downloads new CA certs, the agent uses those for subsequent network requests. If the refresh request fails or if the CA certs are unchanged on the server, then the agent run will continue using the local CA certs it already has. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

ca_server

The server to use for certificate authority requests. It’s a separate server because it cannot and does not need to horizontally scale.

ca_ttl

The default TTL for new certificates. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

cacert

The CA certificate.

cacrl

The certificate revocation list (CRL) for the CA.

cadir

The root directory for the certificate authority.

cakey

The CA private key.

capub

The CA public key.

catalog_cache_terminus

How to store cached catalogs. Valid values are ‘json’, ‘msgpack’ and ‘yaml’. The agent application defaults to ‘json’.

catalog_terminus

Where to get node catalogs. This is useful to change if, for instance, you’d like to pre-compile catalogs and store them in memcached or some other easily-accessed store.

cert_inventory

The inventory file. This is a text file to which the CA writes a complete listing of all certificates.

certdir

The certificate directory.

certificate_revocation

Whether certificate revocation checking should be enabled, and what level of checking should be performed.

When certificate revocation is enabled, OpenVox expects the contents of its CRL to be one or more PEM-encoded CRLs concatenated together. When using a cert bundle, CRLs for all CAs in the chain of trust must be included in the crl file. The chain should be ordered from least to most authoritative, with the first CRL listed being for the root of the chain and the last being for the leaf CA.

When certificate_revocation is set to ‘true’ or ‘chain’, OpenVox ensures that each CA in the chain of trust has not been revoked by its issuing CA.

When certificate_revocation is set to ‘leaf’, OpenVox verifies certs against the issuing CA’s revocation list, but it does not verify the revocation status of the issuing CA or any CA above it within the chain of trust.

When certificate_revocation is set to ‘false’, OpenVox disables all certificate revocation checking and does not attempt to download the CRL.

certname

The name to use when handling certificates. When a node requests a certificate from the CA OpenVox Server, it uses the value of the certname setting as its requested Subject CN.

This is the name used when managing a node’s permissions in OpenVox Server’s auth.conf. In most cases, it is also used as the node’s name when matching node definitions and requesting data from an ENC. (This can be changed with the node_name_value and node_name_fact settings, although you should only do so if you have a compelling reason.)

A node’s certname is available in Puppet manifests as $trusted['certname']. (See Facts and Built-In Variables for more details.)

Defaults to the node’s fully qualified domain name.

ciphers

The list of ciphersuites for TLS connections initiated by OpenVox. The default value is chosen to support TLS 1.0 and up, but can be made more restrictive if needed. The ciphersuites must be specified in OpenSSL format, not IANA.

classfile

The file in which puppet agent stores a list of the classes associated with the retrieved configuration. Can be loaded in the separate puppet executable using the --loadclasses option.

client_datadir

The directory in which serialized data is stored on the client.

clientbucketdir

Where FileBucket files are stored locally.

clientyamldir

The directory in which client-side YAML data is stored.

code

Code to parse directly. This is essentially only used by puppet, and should only be set if you’re writing your own OpenVox executable.

codedir

The main OpenVox code directory. The default for this setting is calculated based on the user. If the process is running as root or the user that OpenVox is supposed to run as, it defaults to a system directory, but if it’s running as any other user, it defaults to being in the user’s home directory.

color

Whether to use colors when logging to the console. Valid values are ansi (equivalent to true), html, and false, which produces no color.

confdir

The main OpenVox configuration directory. The default for this setting is calculated based on the user. If the process is running as root or the user that OpenVox is supposed to run as, it defaults to a system directory, but if it’s running as any other user, it defaults to being in the user’s home directory.

config

The configuration file for the current OpenVox application.

config_file_name

The name of the OpenVox config file.

config_version

How to determine the configuration version. By default, it will be the time that the configuration is parsed, but you can provide a shell script to override how the version is determined. The output of this script will be added to every log message in the reports, allowing you to correlate changes on your hosts to the source version on the server.

Setting a global value for config_version in puppet.conf is not allowed (but it can be overridden from the commandline). Please set a per-environment value in environment.conf instead. For more info, see https://docs.openvoxproject.org/openvox/latest/environments_about.html

crl_refresh_interval

How often the OpenVox agent refreshes its local Certificate Revocation List (CRL). By default, the CRL is refreshed every 24 hours. If a different interval is specified, the agent refreshes its CRL on the next OpenVox agent run if the elapsed time since the CRL was last refreshed exceeds the specified interval.

In general, the interval should be greater than the runinterval value. Setting the crl_refresh_interval value to 0 or an equal or lesser value than runinterval causes the CRL to be refreshed on every run.

If the agent downloads a new CRL, the agent will use it for subsequent network requests. If the refresh request fails or if the CRL is unchanged on the server, then the agent run will continue using the local CRL it already has.This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

csr_attributes

An optional file containing custom attributes to add to certificate signing requests (CSRs). You should ensure that this file does not exist on your CA OpenVox Server; if it does, unwanted certificate extensions may leak into certificates created with the puppetserver ca generate command.

If present, this file must be a YAML hash containing a custom_attributes key and/or an extension_requests key. The value of each key must be a hash, where each key is a valid OID and each value is an object that can be cast to a string.

Custom attributes can be used by the CA when deciding whether to sign the certificate, but are then discarded. Attribute OIDs can be any OID value except the standard CSR attributes (i.e. attributes described in RFC 2985 section 5.4). This is useful for embedding a pre-shared key for autosigning policy executables (see the autosign setting), often by using the 1.2.840.113549.1.9.7 (“challenge password”) OID.

Extension requests will be permanently embedded in the final certificate. Extension OIDs must be in the “ppRegCertExt” (1.3.6.1.4.1.34380.1.1), “ppPrivCertExt” (1.3.6.1.4.1.34380.1.2), or “ppAuthCertExt” (1.3.6.1.4.1.34380.1.3) OID arcs. The ppRegCertExt arc is reserved for four of the most common pieces of data to embed: pp_uuid (.1), pp_instance_id (.2), pp_image_name (.3), and pp_preshared_key (.4) — in the YAML file, these can be referred to by their short descriptive names instead of their full OID. The ppPrivCertExt arc is unregulated, and can be used for site-specific extensions. The ppAuthCert arc is reserved for two pieces of data to embed: pp_authorization (.1) and pp_auth_role (.13). As with ppRegCertExt, in the YAML file, these can be referred to by their short descriptive name instead of their full OID.

csrdir

Where the CA stores certificate requests.

daemonize

Whether to send the process into the background. This defaults to true on POSIX systems, and to false on Windows (where OpenVox currently cannot daemonize).

default_file_terminus

The default source for files if no server is given in a uri, e.g. puppet:///file. The default of rest causes the file to be retrieved using the server setting. When running apply the default is file_server, causing requests to be filled locally.

default_manifest

The default main manifest for directory environments. Any environment that doesn’t set the manifest setting in its environment.conf file will use this manifest.

This setting’s value can be an absolute or relative path. An absolute path will make all environments default to the same main manifest; a relative path will allow each environment to use its own manifest, and OpenVox will resolve the path relative to each environment’s main directory.

In either case, the path can point to a single file or to a directory of manifests to be evaluated in alphabetical order.

default_schedules

Boolean; whether to generate the default schedule resources. Setting this to false is useful for keeping external report processors clean of skipped schedule resources.

deviceconfdir

The root directory of devices’ $confdir.

deviceconfig

Path to the device config file for puppet device.

devicedir

The root directory of devices’ $vardir.

diff

Which diff command to use when printing differences between files. This setting has no default value on Windows, as standard diff is not available, but OpenVox can use many third-party diff tools.

diff_args

Which arguments to pass to the diff command when printing differences between files. The command to use can be chosen with the diff setting.

digest_algorithm

Which digest algorithm to use for file resources and the filebucket. Valid values are sha256, sha384, sha512, sha224, md5. Default is sha256.

disable_i18n

If true, turns off all translations of OpenVox and module log messages, which affects error, warning, and info log messages, as well as any translations in the report and CLI.

disable_per_environment_manifest

Whether to disallow an environment-specific main manifest. When set to true, OpenVox will use the manifest specified in the default_manifest setting for all environments. If an environment specifies a different main manifest in its environment.conf file, catalog requests for that environment will fail with an error.

This setting requires default_manifest to be set to an absolute path.

disable_warnings

A comma-separated list of warning types to suppress. If large numbers of warnings are making OpenVox’s logs too large or difficult to use, you can temporarily silence them with this setting.

If you are preparing to upgrade OpenVox to a new major version, you should re-enable all warnings for a while.

Valid values for this setting are:

dns_alt_names

A comma-separated list of alternate DNS names for OpenVox Server. These are extra hostnames (in addition to its certname) that the server is allowed to use when serving agents. OpenVox checks this setting when automatically creating a certificate for the OpenVox agent or OpenVox Server. These can be either IP or DNS, and the type should be specified and followed with a colon. Untyped inputs will default to DNS.

In order to handle agent requests at a given hostname (like “puppet.example.com”), OpenVox Server needs a certificate that proves it’s allowed to use that name; if a server shows a certificate that doesn’t include its hostname, OpenVox agents will refuse to trust it. If you use a single hostname for OpenVox traffic but load-balance it to multiple OpenVox Servers, each of those servers needs to include the official hostname in its list of extra names.

Note: The list of alternate names is locked in when the server’s certificate is signed. If you need to change the list later, you can’t just change this setting; you also need to regenerate the certificate. For more information on that process, see the cert regen docs.

To see all the alternate names your servers are using, log into your CA server and run puppetserver ca list --all, then check the output for (alt names: ...). Most agent nodes should NOT have alternate names; the only certs that should have them are OpenVox Server nodes that you want other agents to trust.

document_all

Whether to document all resources when using puppet doc to generate manifest documentation.

environment

The environment in which OpenVox is running. For clients, such as puppet agent, this determines the environment itself, which OpenVox uses to find modules and much more. For servers, such as OpenVox Server, this provides the default environment for nodes that OpenVox knows nothing about.

When defining an environment in the [agent] section, this refers to the environment that the agent requests from the primary server. The environment doesn’t have to exist on the local filesystem because the agent fetches it from the primary server. This definition is used when running puppet agent.

When defined in the [user] section, the environment refers to the path that OpenVox uses to search for code and modules related to its execution. This requires the environment to exist locally on the filesystem where puppet is being executed. OpenVox subcommands, including puppet module and puppet apply, use this definition.

Given that the context and effects vary depending on the config section in which the environment setting is defined, do not set it globally.

environment_timeout

How long the OpenVox server should cache data it loads from an environment.

A value of 0 will disable caching. This setting can also be set to unlimited, which will cache environments until the server is restarted or told to refresh the cache. All other values will result in the OpenVox server evicting environments that haven’t been used within the last environment_timeout seconds.

You should change this setting once your OpenVox deployment is doing non-trivial work. We chose the default value of 0 because it lets new users update their code without any extra steps, but it lowers the performance of your OpenVox server. We recommend either:

Once you set environment_timeout to a non-zero value, you need to tell the OpenVox server to read new code from disk using the environment-cache API endpoint after you deploy new code. See the docs for the OpenVox Server administrative API.

environmentpath

A search path for directory environments, as a list of directories separated by the system path separator character. (The POSIX path separator is ‘:’, and the Windows path separator is ‘;’.)

This setting must have a value set to enable directory environments. The recommended value is $codedir/environments. For more details, see https://docs.openvoxproject.org/openvox/latest/environments_about.html

evaltrace

Whether each resource should log when it is being evaluated. This allows you to interactively see exactly what is being done.

exclude_unchanged_resources

Specifies how unchanged resources are listed in reports. When set to true, resources that have had no changes after catalog application will not have corresponding unchanged resource status updates listed in a report.

external_nodes

The external node classifier (ENC) script to use for node data. OpenVox combines this data with the main manifest to produce node catalogs.

To enable this setting, set the node_terminus setting to exec.

This setting’s value must be the path to an executable command that can produce node information. The command must:

Generally, an ENC script makes requests to an external data source.

For more info, see the ENC documentation.

fact_name_length_soft_limit

The soft limit for the length of a fact name.

fact_value_length_soft_limit

The soft limit for the length of a fact value.

factpath

Where OpenVox should look for facts. Multiple directories should be separated by the system path separator character. (The POSIX path separator is ‘:’, and the Windows path separator is ‘;’.)

facts_terminus

The node facts terminus.

fileserverconfig

Where the fileserver configuration is stored.

filetimeout

The minimum time to wait between checking for updates in configuration files. This timeout determines how quickly OpenVox checks whether a file (such as manifests or puppet.conf) has changed on disk. To reparse files within an environment in OpenVox Server please use the environment_cache endpoint

forge_authorization

The authorization key to connect to the Puppet Forge. Leave blank for unauthorized or license based connections

freeze_main

Freezes the ‘main’ class, disallowing any code to be added to it. This essentially means that you can’t have any code outside of a node, class, or definition other than in the site manifest.

genconfig

When true, causes OpenVox applications to print an example config file to stdout and exit. The example will include descriptions of each setting, and the current (or default) value of each setting, incorporating any settings overridden on the CLI (with the exception of genconfig itself). This setting only makes sense when specified on the command line as --genconfig.

genmanifest

Whether to just print a manifest to stdout and exit. Only makes sense when specified on the command line as --genmanifest. Takes into account arguments specified on the CLI.

graph

Whether to create .dot graph files, which let you visualize the dependency and containment relationships in OpenVox’s catalog. You can load and view these files with tools like OmniGraffle (OS X) or graphviz (multi-platform).

Graph files are created when applying a catalog, so this setting should be used on nodes running puppet agent or puppet apply.

The graphdir setting determines where OpenVox will save graphs. Note that we don’t save graphs for historical runs; OpenVox will replace the previous .dot files with new ones every time it applies a catalog.

See your graphing software’s documentation for details on opening .dot files. If you’re using GraphViz’s dot command, you can do a quick PNG render with dot -Tpng <DOT FILE> -o <OUTPUT FILE>.

graphdir

Where to save .dot-format graphs (when the graph setting is enabled).

group

The group OpenVox Server will run as. Used to ensure the agent side processes (agent, apply, etc) create files and directories readable by OpenVox Server when necessary.

hiera_config

The hiera configuration file. OpenVox only reads this file on startup, so you must restart the OpenVox server every time you edit it.

hostcert

Where individual hosts store and look for their certificates.

hostcert_renewal_interval

How often the OpenVox agent renews its client certificate. By default, the client certificate is renewed 30 days before the certificate expires. If a different interval is specified, the agent renews its client certificate during the next agent run, assuming that the client certificate has expired within the specified duration.

In general, the hostcert_renewal_interval value should be greater than the runinterval value. Setting the hostcert_renewal_interval value to 0 disables automatic renewal.

If the agent downloads a new certificate, the agent will use it for subsequent network requests. If the refresh request fails, the agent run continues to use its existing certificate. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

hostcrl

Where the host’s certificate revocation list can be found. This is distinct from the certificate authority’s CRL.

hostcsr

Where individual hosts store their certificate request (CSR) while waiting for the CA to issue their certificate.

hostprivkey

Where individual hosts store and look for their private key.

hostpubkey

Where individual hosts store and look for their public key.

http_connect_timeout

The maximum amount of time to wait when establishing an HTTP connection. The default value is 2 minutes. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

http_debug

Whether to write HTTP request and responses to stderr. This should never be used in a production environment.

http_extra_headers

The list of extra headers that will be sent with http requests to the primary server. The header definition consists of a name and a value separated by a colon.

http_keepalive_timeout

The maximum amount of time a persistent HTTP connection can remain idle in the connection pool, before it is closed. This timeout should be shorter than the keepalive timeout used on the HTTP server, e.g. Apache KeepAliveTimeout directive. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

http_proxy_host

The HTTP proxy host to use for outgoing connections. The proxy will be bypassed if the server’s hostname matches the NO_PROXY environment variable or no_proxy setting. Note: You may need to use a FQDN for the server hostname when using a proxy. Environment variable http_proxy or HTTP_PROXY will override this value.

http_proxy_password

The password for the user of an authenticated HTTP proxy. Requires the http_proxy_user setting.

Note that passwords must be valid when used as part of a URL. If a password contains any characters with special meanings in URLs (as specified by RFC 3986 section 2.2), they must be URL-encoded. (For example, # would become %23.)

http_proxy_port

The HTTP proxy port to use for outgoing connections

http_proxy_user

The user name for an authenticated HTTP proxy. Requires the http_proxy_host setting.

http_read_timeout

The time to wait for data to be read from an HTTP connection. If nothing is read after the elapsed interval then the connection will be closed. The default value is 10 minutes. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

http_user_agent

The HTTP User-Agent string to send when making network requests.

ignore_plugin_errors

Whether the OpenVox run should ignore errors during pluginsync. If the setting is false and there are errors during pluginsync, then the agent will abort the run and submit a report containing information about the failed run.

ignoremissingtypes

Skip searching for classes and definitions that were missing during a prior compilation. The list of missing objects is maintained per-environment and persists until the environment is cleared or the primary server is restarted.

ignoreschedules

Boolean; whether puppet agent should ignore schedules. This is useful for initial puppet agent runs.

include_legacy_facts

Whether to include legacy facts when requesting a catalog. This option can be set to false if all puppet manifests, hiera.yaml, and hiera configuration layers no longer access legacy facts, such as $osfamily, and instead access structured facts, such as $facts['os']['family'].

key_type

The type of private key. Valid values are rsa and ec. Default is rsa.

keylength

The bit length of keys.

lastrunfile

Where puppet agent stores the last run report summary in yaml format.

lastrunreport

Where the OpenVox agent stores the last run report, by default, in yaml format. The format of the report can be changed by setting the cache key of the report terminus in the routes.yaml file. To avoid mismatches between content and file extension, this setting needs to be manually updated to reflect the terminus changes.

ldapattrs

The LDAP attributes to include when querying LDAP for nodes. All returned attributes are set as variables in the top-level scope. Multiple values should be comma-separated. The value ‘all’ returns all attributes.

ldapbase

The search base for LDAP searches. It’s impossible to provide a meaningful default here, although the LDAP libraries might have one already set. Generally, it should be the ‘ou=Hosts’ branch under your main directory.

ldapclassattrs

The LDAP attributes to use to define Puppet classes. Values should be comma-separated.

ldapparentattr

The attribute to use to define the parent node.

ldappassword

The password to use to connect to LDAP.

ldapport

The LDAP port.

ldapserver

The LDAP server.

ldapssl

Whether SSL should be used when searching for nodes. Defaults to false because SSL usually requires certificates to be set up on the client side.

ldapstackedattrs

The LDAP attributes that should be stacked to arrays by adding the values in all hierarchy elements of the tree. Values should be comma-separated.

ldapstring

The search string used to find an LDAP node.

ldaptls

Whether TLS should be used when searching for nodes. Defaults to false because TLS usually requires certificates to be set up on the client side.

ldapuser

The user to use to connect to LDAP. Must be specified as a full DN.

libdir

An extra search path for OpenVox. This is only useful for those files that OpenVox will load on demand, and is only guaranteed to work for those cases. In fact, the autoload mechanism is responsible for making sure this directory is in Ruby’s search path

localcacert

Where each client stores the CA certificate.

localedest

Where OpenVox should store translation files that it pulls down from the central server.

localesource

From where to retrieve translation files. The standard OpenVox file type is used for retrieval, so anything that is a valid file source can be used here.

location_trusted

This will allow sending the name + password and the cookie header to all hosts that OpenVox may redirect to. This may or may not introduce a security breach if OpenVox redirects you to a site to which you’ll send your authentication info and cookies.

log_level

Default logging level for messages from OpenVox. Allowed values are:

logdest

Where to send log messages. Choose between ‘syslog’ (the POSIX syslog service), ‘eventlog’ (the Windows Event Log), ‘console’, or the path to a log file. Multiple destinations can be set using a comma separated list (eg: /path/file1,console,/path/file2)

logdir

The directory in which to store log files

manage_internal_file_permissions

Whether OpenVox should manage the owner, group, and mode of files it uses internally. Note: For Windows agents, the default is false.

manifest

The entry-point manifest for the primary server. This can be one file or a directory of manifests to be evaluated in alphabetical order. OpenVox manages this path as a directory if one exists or if the path ends with a / or .

Setting a global value for manifest in puppet.conf is not allowed (but it can be overridden from the commandline). Please use directory environments instead. If you need to use something other than the environment’s manifests directory as the main manifest, you can set manifest in environment.conf. For more info, see https://docs.openvoxproject.org/openvox/latest/environments_about.html

masterport

The default port puppet subcommands use to communicate with OpenVox Server. (eg puppet facts upload, puppet agent). May be overridden by more specific settings (see ca_port, report_port).

max_deprecations

Sets the max number of logged/displayed parser validation deprecation warnings in case multiple deprecation warnings have been detected. A value of 0 blocks the logging of deprecation warnings. The count is per manifest.

max_errors

Sets the max number of logged/displayed parser validation errors in case multiple errors have been detected. A value of 0 is the same as a value of 1; a minimum of one error is always raised. The count is per manifest.

max_warnings

Sets the max number of logged/displayed parser validation warnings in case multiple warnings have been detected. A value of 0 blocks logging of warnings. The count is per manifest.

maximum_uid

The maximum allowed UID. Some platforms use negative UIDs but then ship with tools that do not know how to handle signed ints, so the UIDs show up as huge numbers that can then not be fed back into the system. This is a hackish way to fail in a slightly more useful way when that happens.

maxwaitforcert

The maximum amount of time the OpenVox agent should wait for its certificate request to be signed. A value of unlimited will cause puppet agent to ask for a signed certificate indefinitely. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

maxwaitforlock

The maximum amount of time the puppet agent should wait for an already running puppet agent to finish before starting a new one. This is set by default to 1 minute. A value of unlimited will cause puppet agent to wait indefinitely. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

merge_dependency_warnings

Whether to merge class-level dependency failure warnings.

When a class has a failed dependency, every resource in the class generates a notice level message about the dependency failure, and a warning level message about skipping the resource.

If true, all messages caused by a class dependency failure are merged into one message associated with the class.

mkusers

Whether to create the necessary user and group that puppet agent will run as.

module_groups

Extra module groups to request from the Puppet Forge. This is an internal setting, and users should never change it.

module_repository

The module repository

module_working_dir

The directory into which module tool data is stored

modulepath

The search path for modules, as a list of directories separated by the system path separator character. (The POSIX path separator is ‘:’, and the Windows path separator is ‘;’.)

Setting a global value for modulepath in puppet.conf is not allowed (but it can be overridden from the commandline). Please use directory environments instead. If you need to use something other than the default modulepath of <ACTIVE ENVIRONMENT'S MODULES DIR>:$basemodulepath, you can set modulepath in environment.conf. For more info, see https://docs.openvoxproject.org/openvox/latest/environments_about.html

name

The name of the application, if we are running as one. The default is essentially $0 without the path or .rb.

named_curve

The short name for the EC curve used to generate the EC private key. Valid values must be one of the curves in OpenSSL::PKey::EC.builtin_curves. Default is prime256v1.

no_proxy

List of host or domain names that should not go through http_proxy_host. Environment variable no_proxy or NO_PROXY will override this value. Names can be specified as an FQDN host.example.com, wildcard *.example.com, dotted domain .example.com, or suffix example.com.

node_cache_terminus

How to store cached nodes. Valid values are (none), ‘json’, ‘msgpack’, or ‘yaml’.

node_name_fact

The fact name used to determine the node name used for all requests the agent makes to the primary server. WARNING: This setting is mutually exclusive with node_name_value. Changing this setting also requires changes to OpenVox Server’s default auth.conf.

node_name_value

The explicit value used for the node name for all requests the agent makes to the primary server. WARNING: This setting is mutually exclusive with node_name_fact. Changing this setting also requires changes to OpenVox Server’s default auth.conf.

node_terminus

Which node data plugin to use when compiling node catalogs.

When OpenVox compiles a catalog, it combines two primary sources of info: the main manifest, and a node data plugin (often called a “node terminus,” for historical reasons). Node data plugins provide three things for a given node name:

  1. A list of classes to add to that node’s catalog (and, optionally, values for their parameters).
  2. Which environment the node should use.
  3. A list of additional top-scope variables to set.

The three main node data plugins are:

noop

Whether to apply catalogs in noop mode, which allows OpenVox to partially simulate a normal run. This setting affects puppet agent and puppet apply.

When running in noop mode, OpenVox will check whether each resource is in sync, like it does when running normally. However, if a resource attribute is not in the desired state (as declared in the catalog), OpenVox will take no action, and will instead report the changes it would have made. These simulated changes will appear in the report sent to the primary OpenVox server, or be shown on the console if running puppet agent or puppet apply in the foreground. The simulated changes will not send refresh events to any subscribing or notified resources, although OpenVox will log that a refresh event would have been sent.

Important note: The noop metaparameter allows you to apply individual resources in noop mode, and will override the global value of the noop setting. This means a resource with noop => false will be changed if necessary, even when running puppet agent with noop = true or --noop. (Conversely, a resource with noop => true will only be simulated, even when noop mode is globally disabled.)

number_of_facts_soft_limit

The soft limit for the total number of fact values. This counts the child elements of all facts (e.g. all items of an array or a hash), not just top level facts.

onetime

Perform one configuration run and exit, rather than spawning a long-running daemon. This is useful for interactively running puppet agent, or running puppet agent from cron.

passfile

Where puppet agent stores the password for its private key. Generally unused.

path

The shell search path. Defaults to whatever is inherited from the parent process.

This setting can only be set in the [main] section of puppet.conf; it cannot be set in [server], [agent], or an environment config section.

payload_soft_limit

The soft limit for the size of the payload.

pidfile

The file containing the PID of a running process. This file is intended to be used by service management frameworks and monitoring systems to determine if an OpenVox process is still in the process table.

plugindest

Where OpenVox should store plugins that it pulls down from the central server.

pluginfactdest

Where OpenVox should store external facts that are being handled by pluginsync

pluginfactsource

Where to retrieve external facts for pluginsync

pluginsignore

What files to ignore when pulling down plugins.

pluginsource

From where to retrieve plugins. The standard OpenVox file type is used for retrieval, so anything that is a valid file source can be used here.

postrun_command

A command to run after every agent run. If this command returns a non-zero return code, the entire OpenVox run will be considered to have failed, even though it might have performed work during the normal run.

preferred_serialization_format

The preferred means of serializing ruby instances for passing over the wire. This won’t guarantee that all instances will be serialized using this method, since not all classes can be guaranteed to support this format, but it will be used for all classes that support it.

preprocess_deferred

Whether OpenVox should call deferred functions before applying the catalog. If set to true, all prerequisites required for the deferred function must be satisfied before the OpenVox run. If set to false, deferred functions follow OpenVox relationships and ordering. In this way, OpenVox can install the prerequisites required for a deferred function and call the deferred function in the same run. Please note that many functions that return complex datatypes will fail when disabling preprocessing and this option may be removed in the future.

prerun_command

A command to run before every agent run. If this command returns a non-zero return code, the entire OpenVox run will fail.

preview_outputdir

The directory where catalog previews per node are generated.

priority

The scheduling priority of the process. Valid values are ‘high’, ‘normal’, ‘low’, or ‘idle’, which are mapped to platform-specific values. The priority can also be specified as an integer value and will be passed as is, e.g. -5. OpenVox must be running as a privileged user in order to increase scheduling priority.

privatedir

Where the client stores private certificate information.

privatekeydir

The private key directory.

profile

Whether to enable experimental performance profiling

publicdir

Where OpenVox stores public files.

publickeydir

The public key directory.

puppet_trace

Whether to print the Puppet stack trace on some errors. This is a noop if trace is also set.

puppetdlog

The fallback log file. This is only used when the --logdest option is not specified AND OpenVox is running on an operating system where both the POSIX syslog service and the Windows Event Log are unavailable. (Currently, no supported operating systems match that description.)

Despite the name, both puppet agent and puppet server will use this file as the fallback logging destination.

For control over logging destinations, see the --logdest command line option in the manual pages for puppet server, puppet agent, and puppet apply. You can see man pages by running puppet <SUBCOMMAND> --help, or read them online at https://docs.openvoxproject.org/openvox/latest/man/.

report

Whether to send reports after every transaction.

report_configured_environmentpath

Specifies how environment paths are reported. When the value of versioned_environment_dirs is true, OpenVox applies the readlink function to the environmentpath setting when constructing the environment’s modulepath. The full readlinked path is referred to as the “resolved path,” and the configured path potentially containing symlinks is the “configured path.” When reporting where resources come from, users may choose between the configured and resolved path.

When set to false, the resolved paths are reported instead of the configured paths.

report_include_system_store

Whether the ‘http’ report processor should include the system certificate store when submitting reports to HTTPS URLs. If false, then the ‘http’ processor will only trust HTTPS report servers whose certificates are issued by the OpenVox CA or one of its intermediate CAs. If true, the processor will additionally trust CA certificates in the system’s certificate store.

report_port

The port to communicate with the report_server.

report_server

The server to send transaction reports to.

reportdir

The directory in which to store reports. Each node gets a separate subdirectory in this directory. This setting is only used when the store report processor is enabled (see the reports setting).

reports

The list of report handlers to use. When using multiple report handlers, their names should be comma-separated, with whitespace allowed. (For example, reports = http, store.)

This setting is relevant to puppet server and puppet apply. The primary OpenVox server will call these report handlers with the reports it receives from agent nodes, and puppet apply will call them with its own report. (In all cases, the node applying the catalog must have report = true.)

See the report reference for information on the built-in report handlers; custom report handlers can also be loaded from modules. (Report handlers are loaded from the lib directory, at puppet/reports/NAME.rb.)

To turn off reports entirely, set this to none

reporturl

The URL that reports should be forwarded to. This setting is only used when the http report processor is enabled (see the reports setting).

requestdir

Where host certificate requests are stored.

resourcefile

The file in which puppet agent stores a list of the resources associated with the retrieved configuration.

resubmit_facts

Whether to send updated facts after every transaction. By default OpenVox only submits facts at the beginning of the transaction before applying a catalog. Since OpenVox can modify the state of the system, the value of the facts may change after OpenVox finishes. Therefore, any facts stored in OpenVoxDB may not be consistent until the agent next runs, typically in 30 minutes. If this feature is enabled, OpenVox will resubmit facts after applying its catalog, ensuring facts for the node stored in OpenVoxDB are current. However, this will double the fact submission load on OpenVoxDB, so it is disabled by default.

rich_data

Enables having extended data in the catalog by storing them as a hash with the special key __ptype. When enabled, resource containing values of the data types Binary, Regexp, SemVer, SemVerRange, Timespan and Timestamp, as well as instances of types derived from Object retain their data type.

route_file

The YAML file containing indirector route configuration.

rundir

Where OpenVox PID files are kept.

runinterval

How often puppet agent applies the catalog. Note that a runinterval of 0 means “run continuously” rather than “never run.” This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

runtimeout

The maximum amount of time an agent run is allowed to take. An OpenVox agent run that exceeds this timeout will be aborted. A value of 0 disables the timeout. Defaults to 1 hour. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

serial

Where the serial number for certificates is stored.

server

The primary OpenVox server to which the OpenVox agent should connect. This setting is ignored when server_list is specified.

server_datadir

The directory in which serialized data is stored, usually in a subdirectory.

server_list

The list of primary OpenVox servers to which the OpenVox agent should connect, in the order that they will be tried. Each value should be a fully qualified domain name, followed by an optional ‘:’ and port number. If a port is omitted, OpenVox uses the serverport setting for that host. This setting takes precedence over server.

serverport

The default port puppet subcommands use to communicate with OpenVox Server. (eg puppet facts upload, puppet agent). May be overridden by more specific settings (see ca_port, report_port).

settings_catalog

Whether to compile and apply the settings catalog

show_diff

Whether to log and report a contextual diff when files are being replaced. This causes partial file contents to pass through OpenVox’s normal logging and reporting system, so this setting should be used with caution if you are sending OpenVox’s reports to an insecure destination. This feature currently requires the diff/lcs Ruby library.

signeddir

Where the CA stores signed certificates.

skip_logging_catalog_request_destination

Specifies whether to suppress the notice of which compiler supplied the catalog. A value of true suppresses the notice.

skip_tags

Tags to use to filter resources. If this is set, then only resources not tagged with the specified tags will be applied. Values must be comma-separated.

sourceaddress

The address the agent should use to initiate requests.

splay

Whether to sleep for a random amount of time, ranging from immediately up to its $splaylimit, before performing its first agent run after a service restart. After this period, the agent runs periodically on its $runinterval.

For example, assume a default 30-minute $runinterval, splay set to its default of false, and an agent starting at :00 past the hour. The agent would check in every 30 minutes at :01 and :31 past the hour.

With splay enabled, it waits any amount of time up to its $splaylimit before its first run. For example, it might randomly wait 8 minutes, then start its first run at :08 past the hour. With the $runinterval at its default 30 minutes, its next run will be at :38 past the hour.

If you restart an agent’s puppet service with splay enabled, it recalculates its splay period and delays its first agent run after restarting for this new period. If you simultaneously restart a group of OpenVox agents with splay enabled, their checkins to your primary servers can be distributed more evenly.

splaylimit

The maximum time to delay before an agent’s first run when splay is enabled. Defaults to the agent’s $runinterval. The splay interval is random and recalculated each time the agent is started or restarted. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

srv_domain

The domain which will be queried to find the SRV records of servers to use.

ssl_client_header

The header containing an authenticated client’s SSL DN. This header must be set by the proxy to the authenticated client’s SSL DN (e.g., /CN=puppet.puppetlabs.com). OpenVox will parse out the Common Name (CN) from the Distinguished Name (DN) and use the value of the CN field for authorization.

Note that the name of the HTTP header gets munged by the web server common gateway interface: an HTTP_ prefix is added, dashes are converted to underscores, and all letters are uppercased. Thus, to use the X-Client-DN header, this setting should be HTTP_X_CLIENT_DN.

ssl_client_verify_header

The header containing the status message of the client verification. This header must be set by the proxy to ‘SUCCESS’ if the client successfully authenticated, and anything else otherwise.

Note that the name of the HTTP header gets munged by the web server common gateway interface: an HTTP_ prefix is added, dashes are converted to underscores, and all letters are uppercased. Thus, to use the X-Client-Verify header, this setting should be HTTP_X_CLIENT_VERIFY.

ssl_lockfile

A lock file to indicate that the ssl bootstrap process is currently in progress.

ssl_trust_store

A file containing CA certificates in PEM format that OpenVox should trust when making HTTPS requests. This only applies to https requests to non-OpenVox infrastructure, such as retrieving file metadata and content from https file sources, puppet module tool and the ‘http’ report processor. This setting is ignored when making requests to puppet:// URLs such as catalog and report requests.

ssldir

Where SSL certificates are kept.

statedir

The directory where OpenVox state is stored. Generally, this directory can be removed without causing harm (although it might result in spurious service restarts).

statefile

Where the OpenVox agent and OpenVox Server store state associated with the running configuration. In the case of OpenVox Server, this file reflects the state discovered through interacting with clients.

statettl

How long the OpenVox agent should cache when a resource was last checked or synced. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y). A value of 0 or unlimited will disable cache pruning.

This setting affects the usage of schedule resources, as the information about when a resource was last checked (and therefore when it needs to be checked again) is stored in the statefile. The statettl needs to be large enough to ensure that a resource will not trigger multiple times during a schedule due to its entry expiring from the cache.

static_catalogs

Whether to compile a static catalog, which occurs only on OpenVox Server when the code-id-command and code-content-command settings are configured in its puppetserver.conf file.

storeconfigs

Whether to store each client’s configuration, including catalogs, facts, and related data. This also enables the import and export of resources in the Puppet language - a mechanism for exchange resources between nodes.

By default this uses the ‘puppetdb’ backend.

You can adjust the backend using the storeconfigs_backend setting.

storeconfigs_backend

Configure the backend terminus used for StoreConfigs. By default, this uses the OpenVoxDB store, which must be installed and configured before turning on StoreConfigs.

strict

The strictness level of OpenVox. Allowed values are:

The strictness level is for both language semantics and runtime evaluation validation. In addition to controlling the behavior with this primary server switch some individual warnings may also be controlled by the disable_warnings setting.

No new validations will be added to a micro (x.y.z) release, but may be added in minor releases (x.y.0). In major releases it expected that most (if not all) strictness validation become standard behavior.

strict_environment_mode

Whether the agent specified environment should be considered authoritative, causing the run to fail if the retrieved catalog does not match it.

strict_variables

Causes an evaluation error when referencing unknown variables. (This does not affect referencing variables that are explicitly set to undef).

summarize

Whether to print a transaction summary.

supported_checksum_types

Checksum types supported by this agent for use in file resources of a static catalog. Values must be comma-separated. Valid types are sha256, sha256lite, sha384, sha512, sha224, sha1, sha1lite, md5, md5lite, mtime, ctime, etag. Default is sha256, sha384, sha512, sha224, md5.

syslogfacility

What syslog facility to use when logging to syslog. Syslog has a fixed list of valid facilities, and you must choose one of those; you cannot just make one up.

tags

Tags to use to find resources. If this is set, then only resources tagged with the specified tags will be applied. Values must be comma-separated.

tasks

Turns on experimental support for tasks and plans in the puppet language. This is for internal API use only. Do not change this setting.

top_level_facts_soft_limit

The soft limit for the number of top level facts.

trace

Whether to print stack traces on some errors. Will print internal Ruby stack trace interleaved with Puppet function frames.

transactionstorefile

Transactional storage file for persisting data between transactions for the purposes of inferring information (such as corrective_change) on new data received.

trusted_external_command

The external trusted facts script or directory to use. This setting’s value can be set to the path to an executable command that can produce external trusted facts or to a directory containing those executable commands. The command(s) must:

If the setting points to an executable command, then the external trusted facts will be stored in the ‘external’ key of the trusted facts hash. Otherwise for each executable file in the directory, the external trusted facts will be stored in the <basename> key of the trusted['external'] hash. For example, if the files foo.rb and bar.sh are in the directory, then trusted['external'] will be the hash { 'foo' => <foo.rb output>, 'bar' => <bar.sh output> }.

trusted_oid_mapping_file

File that provides mapping between custom SSL oids and user-friendly names

use_cached_catalog

Whether to only use the cached catalog rather than compiling a new catalog on every run. OpenVox can be run with this enabled by default and then selectively disabled when a recompile is desired. Because an OpenVox agent using cached catalogs does not contact the primary server for a new catalog, it also does not upload facts at the beginning of the OpenVox run.

use_last_environment

OpenVox saves both the initial and converged environment in the last_run_summary file. If they differ, and this setting is set to true, we will use the last converged environment and skip the node request.

When set to false, we will do the node request and ignore the environment data from the last_run_summary file.

use_srv_records

Whether the server will search for SRV records in DNS for the current domain.

usecacheonfailure

Whether to use the cached configuration when the remote configuration will not compile. This option is useful for testing new configurations, where you want to fix the broken configuration rather than reverting to a known-good one.

user

The user OpenVox Server will run as. Used to ensure the agent side processes (agent, apply, etc) create files and directories readable by OpenVox Server when necessary.

vardir

Where OpenVox stores dynamic and growing data. The default for this setting is calculated specially, like confdir_.

vendormoduledir

The directory containing vendored modules. These modules will be used by all environments like those in the basemodulepath. The only difference is that modules in the basemodulepath are pluginsynced, while vendored modules are not

versioned_environment_dirs

Whether or not to look for versioned environment directories, symlinked from $environmentpath/<environment>. This is an experimental feature and should be used with caution.

waitforcert

How frequently puppet agent should ask for a signed certificate.

When starting for the first time, puppet agent will submit a certificate signing request (CSR) to the server named in the ca_server setting (usually the primary OpenVox server); this may be autosigned, or may need to be approved by a human, depending on the CA server’s configuration.

The OpenVox agent cannot apply configurations until its approved certificate is available. Since the certificate may or may not be available immediately, puppet agent will repeatedly try to fetch it at this interval. You can turn off waiting for certificates by specifying a time of 0, or a maximum amount of time to wait in the maxwaitforcert setting, in which case puppet agent will exit if it cannot get a cert. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

waitforlock

How frequently puppet agent should try running when there is an already ongoing puppet agent instance.

This argument is by default disabled (value set to 0). In this case puppet agent will immediately exit if it cannot run at that moment. When a value other than 0 is set, this can also be used in combination with the maxwaitforlock argument. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

write_catalog_summary

Whether to write the classfile and resourcefile after applying the catalog. It is enabled by default, except when running puppet apply.

yamldir

The directory in which YAML data is stored, usually in a subdirectory.